KDM Solar battery enclosure/ cabinet
  • High-end products and total solutions
  • Plenty of functional products are available
  • equipped with modern technologies

Your Best Solar battery enclosure/ cabinet Manufacturer

Additionally, the electrical pedestal enclosure has a large sun shield that reduces solar heat load inside the cabinet, thus with thermostat controlled filtered fan cooling and louvered vents ensure reliable operation in high-temperature environments. If you can’t find the right enclosure in our selection and you have a pedestal design in mind, our in-house engineering team can modify and custom-make an enclosure to meet your demands. These options mean you can find the right enclosures for your project, without making compromises.

KDM Solar battery enclosure/ cabinet Series

Control Cabinet Solar Battery Enclosure/cabinet

Control Cabinet holds actual 4 batteries at the same time. KDM is dedicated to creating control cabinet products to be an addition to your company`s development.

NEMA 4x Solar Battery Enclosure/cabinet

NEMA 4x solar battery enclosures or a cabinet type are available at KDM. Its primary use is to give protection and safety when operating electrical power procedures.

Powder-Coated Solar Battery Enclosure/cabinet

KDM is a premier manufacturer of powder-coated solar battery enclosures/cabinets in China. At KDM, customization of powder-coated solar battery enclosure/cabinet is available.

Medical Grade Solar Battery Enclosure/cabinet

A medical-grade solar battery enclosure/cabinet can be horizontally or vertically assembled. All our medical-grade solar battery enclosures/cabinets are suitable for your applications.

Wet Coat Solar Battery Enclosure/cabinet

To avoid critical involvement in electrical power procedures, KDM wet coat solar battery enclosure/ cabinet can secure power distribution to prevent any short circuit problems.

Battery Box Solar Battery Enclosure/cabinet

Keeping your battery safe, KDM battery box solar battery enclosure/cabinet is good for your actual needs. It is safe and proven in many years in manufacturing.

8 Products Found.

Send your Inquiry on KDM Electrical Pedestal Enclosure

Solar battery enclosure/ cabinet
Solar battery enclosure/ cabinet

With a decade of experience, we at KDM have developed an in-depth knowledge of what our customers need when purchasing enclosure. We work hard to provide innovative products that push the industry forward and help our customers succeed.

  • Proven and tested quality solar battery enclosure
  • Enhanced performance and features
  • 10 years of experience
  • high-quality and authentic

Electrical Enclosure laser-cutting
Electrical Enclosure Laser Cutting

4000W high performance laser cutting machine, +/- 0.05mm accuracy. No burr, no scratching.

Electrical Enclosure Welding
Electrical Enclosure Welding

Multi-Functioning flexible welding equipment, high accuracy, no deformation.

Electrical Enclosure Bending
Electrical Enclosure Bending

+/- 0.5mm bending precision, smooth surface without bending marks.

Electrical Enclosure Polishing
Electrical Enclosure Polishing

10+ welding experience workers, perfect overall appearance.

Electrical Enclosure Foaming
Electrical Enclosure Foaming

High speed and accuracy foaming machines, fast and qualified Gasket

electrical enclosure assembly
Electrical Enclosure Assembly

Expert assembling team, consistent assembly quality on every KDM enclosure

KDM Electrical Pedestal Enclosure

KDM electrical pedestals enclosure comes with ground stakes which are available in single and double door designs as well as back to back configuration. The enclosure body can be constructed using galvanized steel, stainless steel and steel materials, offers superior corrosion resistant properties. Thus enclosure can be powder coat paint that offers a durable finish for longer life.

galvanized Electrical Pedestal Enclosure
Besides, this structure also comes with various mounting options, making it highly versatile in its specific applications. With KDM electrical pedestal enclosure, your electrical pedestal enclosure is built to last, for that reason you can constantly save time and money.

Free Standing Enclosure Electrical Pedestal Enclosure
At KDM, we supply outstanding electrical pedestal enclosures outdoor for 10 consecutive years. We help our clients in terms of solving their pedestal enclosure unique challenges as we provide multiple sizes and styles of the enclosure and have custom-design options available. Our team of engineers has taken these factors into account and designed our enclosures accordingly.

gavalized double door Electrical Pedestal EnclosureOur expertise includes ideas and solutions that allow us to effectively provide you top quality electrical pedestal enclosure products. As an electrical enclosure specialist, we can help you get exactly what you need without overspending. With custom design by our highly trained team and experts, along with our quality management system based on ISO 9001 standards, we provide solutions you can count on to get the job done. Contact us today.

Electrical Pedestal Enclosure blending

Electrical Pedestal Enclosure: The Ultimate FAQ Guide

Before you start importing electrical pedestal enclosure from China, read this guide.

It is your blueprint to becoming an expert and having knowledge on electrical enclosures.

You will find everything here – be it standard specifications, designs, classification criteria, etc.

Let’s dive right in:

What is an Electrical Pedestal Enclosure?

An electrical pedestal enclosures is a cabinet used for enclosing electronic controls, terminals, and instruments.

This makes inspection, and connection termination easy.

Electrical pedestal enclosures also help to prevent electric shock to equipment users.

They protect internal components and contents from adverse environmental factors.

Electrical pedestal enclosures are built in such a way that they can offer adequate ventilation for sensitive internal components and contents.

What are the types of Electrical pedestal enclosure?

According to the National Electrical Manufacturers Association (NEMA) there are 13 types of electrical pedestal enclosures classified according to functionality.

These include:

  • Type 1: General purpose enclosures: These enclosures are made to offer protection against dust, direct light, and water splashing.

Also, they are, however, not dust-tight.

They are primarily used to avert contact with live electric and electronic parts.

Type 1 enclosures are designed to be used indoors as they work optimally under normal atmospheric conditions.

  • Type 2: Drip-tight enclosures. They are similar to Type 1 but possess additional drip shields. Besides, they are used to offer protection against condensation in areas such as laundry rooms.
  • Type 3: Weather resistant enclosures. These types of enclosures are designed to offer protection against dust, rain, snow, and ice. They are designed for outdoor use.
  • Type 3R: They are similar to Type 3 but they do not protect against windblown dust.
  • Type 3S: They are also similar to Type 3 but they can be operated even when laden with ice.
  • Types 3X, 3RX, and 3SX: X denotes an additional corrosion resistance. They are used near salty water bodies.
  • Types 4 and 4X: Watertight electrical enclosures. They are used outdoors in ship docks, sewage treatment plants, and breweries among others. X indicates additional corrosion resistance.
  • Type 5: Dust-tight electrical enclosures. They have gaskets or equivalents to protect against dust. Additionally, they are normally used in cement plants and steel mills.
  • Type 6 and 6P: Submersible. They are submersible in oil and water and often used in mines, quarries, and manholes. Whereas 6 is temporarily submersible in water, 6P can prolonged submersion.
  • Type 7: They are classified for indoor use in specific hazardous conditions.
  • Type 8: They are classified for indoor and outdoor use in specified hazardous conditions.
  • Type 9: Also classified for indoor and outdoor use in specified hazardous conditions.
  • Type 10: These are designed to meet all the requisite standards of the Mine Safety and Health Administration.
  • Type 11: General purpose electrical enclosures: They are designed to provide protection against the corrosion caused by corrosive liquids and gases. As such they must meet corrosion resistance and drip resistance test requirements.
  • Type 12 and 12K: General purpose electrical enclosures. They are designed to provide protection against dust, dirt, and non-corrosive liquids.

As such, they must meet rust, dust, and drip resistance requirements.

They are used indoors.

  • Type 13: General purpose electrical enclosures. They are used to protect against dust, dripping non-corrosive coolants, and spraying of water.

Oil exclusion and rust resistance are their key features.

What are the Advantages of using Electrical Pedestal Enclosure?

Electrical depestal enclosure

Electrical pedestal enclosure

The advantages of electrical pedestal enclosures lie in their functionalities and build materials.

They protect electronics and related components.

It ensures safe working environment and provides cost effective solution.

They protect electronic components from hazardous environmental factors.

Besides, it protects electronic components from unauthorized access.

Remember, it will also protect technicians from accidents such as electrical shock.

What are the limitations of Electrical Pedestal Enclosure?

Some of the main limitations of these electrical enclosures include:

i. High initial costs

ii. Fabrication is cumbersome and time-consuming

iii. Depending on the size, they can be bulky and difficult to install

What factors should you consider when importing Electrical Pedestal Enclosure?

You should consider the following:

 Pedestal electrical enclosure

Pedestal electrical enclosure

  • Environmental conditions: It is important to know the environmental and weather conditions under which an enclosure is to be used.

This helps in determining the build material of an enclosure.

  • Thermal requirements: The thermal conditions and specifications of the electronic circuit must be considered in choosing an enclosure for sensitive electrical components.

This helps determine the choice of build material for an enclosure.

Plastics, for instance, are excellent insulators and can thus be used for electronic circuits with low heat dissipation requirements.

  • Type of material: It is important to choose an enclosure made of a material that fits the exact needs of its operation.
  • The total cost of ownership: The purchasing, operation, and maintenance costs of enclosures should also be considered. They contribute to the total cost of ownership for the buyer.
  • Size and design of the enclosure: these should be considered to make the process of installation more convenient and feasible.

An enclosure should also be big enough to facilitate efficient power distribution and cable management.

  • Electromagnetic compatibility: With the ever-present threat of electromagnetic interference (EMI), an enclosure that can protect vital components from such interference is vital.
  • Industry standards relating to design and performance: As these are set out by regulators. It is important to make sure that the acquired enclosure meets industry product specification requirements.

These may include IP, NEMA, RoHS, or CE standards.

Which material is Electrical Pedestal Enclosure made of?

Steel: Electrical pedestal enclosures are mainly made of galvanized steel, steel, and stainless steel materials.

These materials ensure that the electrical pedestal enclosures are durable, long-lasting, corrosion-resistant and thus resistant to rusting.

The longevity of the enclosures is of prime importance given that they are sometimes stationed underground or outside houses.

Besides ensuring longevity, steel is preferred for its aesthetic value.

This is usually achieved by painting a steel enclosure with powder paint that gives it a durable finish for longevity.

Medical, pharmaceutical, and food industries prefer steel enclosures for their fungal and bacterial resistance and non-porosity.

Aluminum: Aluminum is also a popular choice for manufacturing enclosures.

This is due to aluminum’s light weight, comparative strength, inexpensiveness, and resistance to corrosion.

Aluminum is also preferred for its sturdiness and malleability besides being a strong shield against electromagnetic interference.

Polycarbonate: Some enclosures are made from Polycarbonate.

Polycarbonate is preferred for its strength, malleability, lightness, non-conduction, non-magnetism, and resistance to some forms of corrosion.

Fiberglass: Fiberglass is another option for manufacturers of enclosures.

Fiberglass is known for its chemical resistance and suitability to both outdoor and indoor use.

When should one use Fiberglass as the main Material for Electrical Pedestal Enclosure?

Fiberglass enclosures resist chemicals in corrosive applications.

The material can be used over all indoor and outdoor temperature ranges.

Fiberglass can be installed in environments that are constantly wet.

 Fiberglass electrical enclosure

Fiberglass electrical enclosure

What is the Working Principle for Electrical Pedestal Enclosure?

Electrical pedestal enclosures are cabinets designed to house electrical and electronic controls, terminals, and instruments.

An enclosure casing forms a physical barrier between users, the enclosure’s contents, and the general environment.

This way, the enclosures helps to minimize the risk of electric shock to equipment users.

At the same time, it provides protection for its contents from harmful elements.

Enclosures also regulate the temperature around within them and around them sensitive contents through systems that includes vents, heaters, and conditioners.

What is Secondary Pedestal?

A secondary tap pedestal is a cabinet that encloses secondary wire connectors emanating from the secondary sides of transformers.

What Factors affect the Efficiency of Electrical Pedestal Enclosure?

Various factors affect the efficiency of electrical pedestal enclosures.

These include:

  • Electromagnetic/ radio frequency interference: This is a disturbance caused by electromagnetic induction, electrostatic coupling, or conduction. This disturbance can degrade the performance of an enclosure or even stop it from functioning.
  • Electrostatic discharge: This is the sudden flow of electricity between two electrically charged objects due to short-circuiting, contact, or dielectric breakdowns. Electrostatic discharges can result in the damage of sensitive electronic components.
  • Heat dissipation: An enclosure that does not dissipate heat quickly enough runs the risk of being less efficient.

For this reason, most enclosures have inbuilt fan cooling and louvered vents to help dissipate heat.

  • Engineering Application and IP Ratings: The scope and application of your electrical circuit play an integral role affecting its efficiency.

Regulatory requirements such as Ingress Protection ratings (IP ratings), for instance, reflect an enclosures needs vis-à-vis the degree of protection.

That is, the protection it offers against contact with live parts, mechanical damage, and environmental factors.

  • Environmental conditions: The prevailing environmental conditions around an enclosure also affect its efficiency. Environmental concerns inform the choice of material used in making an enclosure.
  • Size of the enclosure: Though smaller sizes of enclosures are preferred today, enclosures should be big enough to facilitate more convenient and feasible installations.

Bigger enclosures make proper power distribution and cable management easier.

  • Flexibility of design: Enclosure design should maximize flexibility in terms of depth, height, and width.

Electrical pedestral enclosure

Electrical pedestal enclosure

What are the Quality Standards for Electrical Pedestal Enclosure?

Some of these standards are:

1) NEMA Ratings

In the US, the National Electrical Manufacturers Association (NEMA) plays a critical role in monitoring the quality of electrical equipment.

NEMA seeks to guarantee the safety of users through the publication of enclosure type standards vis-à-vis their performance.

The NEMA quality standards for enclosures cover aspects such as corrosion resistance, durability, and ability to protect against environmental hazards such as:

  • Water
  • Dust
  • Oil
  • Coolant
  • Atmosphere containing corrosive agents such as gasoline or acetylene

2) UL 508A Certification

Sought by electrical inspectors, the UL 508A Listing Mark provides evidence of third party certification inspection authorities and buyers.

3) IEC 60529

The IEC 60529– It is also known as the IP Code, International Protection Marking, or the Ingress Protection Marking.

It classifies and rates the degree of protection enclosures provide against intrusion, accidental contact, water, and dust.

4) cGMP

cGMP refers to current good manufacturing practice regulations.

This is one of the commonly sort after quality mark.

These standards are based on Food and Drug Administration (FDA) as this body develops the standards.

When purchasing a semi-automatic capsule filling machine, these standards will help you in determining that the machine has been manufactured appropriately.

5) CE

This is a common standardization certification in the European Economic Area.

There are a number of parameters that underlie this CE certification.

These include safety standards and health standards.

It also incorporates environmental protection standards.

It is essential that you check put these standards when purchasing your semi-automatic capsule filling machine from Europe.

Goods manufactured from other continents for the European market also have to conform to these standards.

6) RoHS

RoHS refers to Restriction of Hazardous Substances.

This standardization mark has its origin in the European Union.

It is a consumer-centered standardization mark.

It ensures safety by restricting dangerous products that might be used on the products.

Some of the restricted substances include lead, mercury, cadmium and chromium.

· CCC

This is a standardization mark used in the Chinese market.

is used in regulating products that are manufactured in the chines market.

It will be important to check out this standardization when purchasing a semi-automatic capsule filling machine in China.

· ISO

ISO certification is centered on the safety of the customers.

This is usually done without undermining the quality of the product.

This is a universal mark of quality.

· ASTM

This is also a globally accepted standardization.

The commonly accepted standards among manufacturers are published.

This is a very important quality standard in the service industry.

Ensure you check this out when purchasing your semi-automated capsule filling machine.

Which components make Electrical Pedestal Enclosure?

Electrical pedestal enclosures comprise of various components, including:

Technical drawing of electrical enclosure

Technical drawing of electrical enclosure

  • Fasteners such as screws, nuts, bolts, washers, and rivets to support the structure
  • Fan hardware for thermoregulation
  • Locks to control access and deter tampering
  • Hinges for to hold the doors in place
  • Gaskets for dust resistance
  • Sealants for water resistance
  • Swing and pull handles for enclosure doors to aid quick and seamless functionality
  • Feet for stability
  • Castors to aid mobility
  • Cable management paraphernalia such as cable ties, cable glands, grommets, conduits, wraps, clips, and clamps

Is there a difference between Electrical Pedestal Enclosure and Standard Electrical Cabinets?

The difference comes mainly in the application.

Pedestal enclosures are designed for industrial and commercial applications while standard electrical cabinets are designed for general use.

How do you specify Electrical Pedestal Enclosure?

Electrical pedestal enclosures are specified according to their characteristics and functionalities.

There are general-purpose enclosures that can be used in various environmental settings and specific enclosures such as watertight enclosures, dust-tight enclosures, and submersible enclosures.

You should specify:

i. Material type

ii. Standard rating

iii. Size

iv. Voltage rating, where possible

v. Number of doors

vi. Mounting mechanism

vii. Partitioning of the enclosure

viii. Additional accessories such as cooling and heating mechanism

ix. Cable management systems

What Safety Measures should you consider when installing Electrical Pedestal Enclosure?

  •  Repair or replace damaged power cords. Exposed wiring is a danger that cannot be ignored.
  • Do not overload outlets.
  • Avoid extension cords.
  • Keep electrical equipment or outlets away from water.
  • Ensure you use enclosure that complies with set standards
  • Remember to follow installation instruction as directed by the manufacturer

How many Connectors can Secondary Pedestal Enclosure Accommodate?

A secondary pedestal enclosure can accommodate three connectors.

Of course, you can also opt for custom options too.

What is a Hubbel Power Pedestal?

Hubbell power pedestals are partially buried pedestals commonly used for electric utility and communication applications and that can be customized with internal components to provide turn-key solutions.

Why is UL Certification important in the Manufacture of Electrical Pedestal Enclosure?

UL certification is important for ensuring the safety, compatibility, and proper functioning of electrical pedestal enclosures.

The certifications define the types of environments under which various electrical enclosures can be used.

Of course this is after they have been tested to gauge their ability to withstand various environmental conditions.

Electrical depestal specification

Electrical pedestal enclosure specification

What are the different Types of Commercial Pedestals?

There are various types of commercial pedestals.

These include service pedestals, single meter pedestals, dual meter pedestals, and un-metered pedestals.

What Properties of Stainless Steel make it the Best Material for Pedestal Enclosures?

Stainless steel is used in the construction of enclosures owing to their high durability and resistance to corrosion.

Steel is also moisture resistant, chemical resistant, bacterial and fungal resistant due to non-porosity besides being the strongest construction option.

Pedestal enclosure

Pedestal enclosure

What are the Disadvantages of Polycarbonate Electrical Pedestal Enclosure?

Polycarbonate electrical enclosures are susceptible to scratching or abrasion.

This means that enclosures made of polycarbonate are relatively predisposed to damage and loss of aesthetics.

Why is IP rated Electrical Pedestal Enclosure?

Electrical pedestal enclosures are IP rated to help delineate their effectiveness at protecting against various environmental factors such as water, dust, heat, and moisture.

IP Rating creteria

IP Rating criteria

How do you Cool Electrical Pedestal Enclosure?

Electrical pedestal enclosures normally have inbuilt thermostat controlled fan cooling system.

This is to help dissipate heat in high temperatures.

Additionally, they possess louvered vents to ensure that heat dissipates quickly to cool them down.

Can you Insulate Electrical Pedestal Enclosure?

Electrical pedestal enclosures can be insulated to provide added levels of environmental control and efficiency.

Normally, insulated outdoor enclosures come with air conditioners, sun shields, thermostats, and heaters to further help in thermoregulation.

How do you Manufacture Electrical Pedestal Enclosure?

The process of manufacturing electrical pedestal enclosure include:

  • Know the components you will install in the enclosure
  • Understand the environmental conditions where you intend to install the electrical pedestal enclosure – this will help you choose an appropriate NEMA or IP rating for the enclosure
  • Design the electrical pedestal enclosure and state the appropriate dimensions
  • Choose suitable material for electrical pedestal enclosure
  • Machine and fabricate various parts of electrical pedestal enclosure
  • Assemble the electrical enclosure
  • Install all the necessary accessories
  • Take the enclosure through various finishing operations (This may come after or before assembly process. It will depend on the nature of the finishing operations).
  • Conduct quality inspections on the electrical pedestal enclosure

Do you need Ventilation System for Electrical Pedestal Enclosure?

A ventilation system is critically important for electrical pedestal enclosures.

The ventilation systems help in regulating the temperature of the enclosures.

Remember, electrical enclosures are normally predisposed to high temperatures.

It is the ventilation systems that allow for free flow of air.

What is an EMC Electrical Pedestal Enclosure?

An EMC electrical pedestal enclosure is an electrical enclosure that meets electromagnetic compatibility.

That is, it is the ability of electrical equipment to operate optimally in electromagnetic environments without causing electromagnetic interference to other electrical equipment in their vicinity.

Of course, you can also define the maximum emissions it emits and the maximum interference it withstands when operating optimally.

This is another way of ensuring EMC electrical enclosure compatibility.

An EMC enclosure should, thus, limit outbound emissions and inbound interferences.

What is Cable Management in Electrical Pedestal Enclosure?

Cable management refers to the management of electrical or optical cables in an electrical pedestal enclosure in such a way as to minimize the tangling, accidental unplugging, or short-circuiting.

It involves such measures as cable selection, cable labeling, and cable planning.

How do you Choose the Right Size of Electrical Pedestal Enclosure?

Power pedestal enclosure

Figure 9 Power pedestal enclosure

Size determines the convenience and feasibility of an installation and is thus an important parameter when choosing what enclosure to buy.

Size determines, among other things, aspects such as the:

  • Costs of cooling or heating enclosures
  • Mounting type or mechanism
  • Component spacing and size within the enclosure

Generally, enclosures should be big enough to facilitate efficient power distribution and cable management and to conform to NEMA regulations.

Are there custom Electrical Pedestal Enclosures?

There are custom electrical pedestal enclosures.

These are electrical pedestal enclosures designed to your unique specifications and requirements.

Can you heat Electrical Pedestal Enclosure?

Yes, electrical pedestal enclosures can be heated.

But again, thermoregulation and heat dissipation are of primal importance in the design process.

There are quite a number of electrical enclosure heaters you can use.

Enclosure heaters can be used to combat the effects of cold weather such as condensation and humidity in enclosures.

Why import Electrical Pedestal Enclosure from China?

First, you will get competitive prices for the electrical pedestal enclosure.

Second, Chine electrical pedestal enclosures mainly support OEM businesses.

So, if you want to start an electrical enclosure business, you will benefits a lot.

With the changing manufacturing and technological advancements, you can enjoy fast-turnaround.

Besides, the companies will support you right from the design stage all through to technical support.

Now, it’s your turn:

Are you looking for an electrical pedestal enclosure? Or, do you have questions on electrical enclosure cabinets?

KDMSteel team is here to help you for free.

Related Products with Solar battery enclosure/ cabinet

  • Solar Inverter battery Enclosure/Cabinet
    KDM offers effective solutions for your solar inverter battery enclosure needs. All our products are customizable according to your needs and requirements.
  • Ip67 Solar Battery Enclosure/Cabinet
    For any electrical troubles, our Ip67 solar battery enclosure/cabinet can prevent any problems caused by overloading or short circuit. Every function surely provides your specifications.
  • BBA Solar Battery Enclosure/Cabinet
    KDM is the top leading manufacturer of solar battery enclosures in China. It helps in protecting your components from damaging elements. These are best for electrical applications.
  • Underground Solar Battery enclosure/cabinet
    KDM underground solar battery enclosure/cabinets are affordable and customizable according to your designs and sizes.

What is Electrical Pedestal Enclosure?

PED-221818-SS Enclosure Pedestal Stand - Stainless - EIC
Electrical Pedestal Enclosure

An electrical pedestal enclosure is a cabinet designed to house terminals, electronic controls, and components.

The enclosure provides durability and protection against hazardous elements. They also give excellent ventilation for certain components.

What Materials Used in Manufacturing Electrical Pedestal Enclosure?

Choose the right material for your electrical pedestal enclosure. Here are options:

  • Carbon Steel and Stainless Steel

These two materials are used due to their corrosion resistance, high chemical resistant, moisture resistant, and excellent durability.

They are the sturdiest out of all options.

The carbon steel electrical pedestal enclosure can be cold or hot rolled. This can meet ASTM A611 and ASTM A3666 standards.

However, stainless steel electrical pedestal enclosures are fungal and bacterial protected. It means they can completely protect the electrical pedestal enclosure contents.

  •  Aluminum

The aluminum electrical pedestal enclosure is picked because of its extreme sturdiness, lightweight, affordability, and rust resistance.

They work well in cruel environments and are completely durable.

Aluminum acts as a protector against electromagnetic intrusion.

  • Polycarbonate

Polycarbonate material is chosen because it is sturdy but lightweight.

They are also non-magnetic and non-conductive.

Perfect choice since they are protected against acidic and corrosive environments. But, it is mostly exposed to harsh cleaners.

Polycarbonate is a good choice since it is easy to modify.

  • Fiberglass

Most fiberglass electrical pedestal enclosures can resist chemicals in an abrasive environment.

They are both ideal in outdoor or indoor temperature domains.

An electrical pedestal enclosure made of fiberglass material can be installed in environments that are always wet.

What are the Electrical Pedestal Enclosure Designs?

Commercial Service Pedestal (CSP-B) - StrongBox

A standard electrical pedestal enclosure is designed with several components, including:

  • Swing side top grant for a total exposure of meter section
  • Powder-coated in various colors
  • Hinged removable lid
  • Meter socket with trial blocks
  • Platform lugs
  • Load center
  • 5” x 10” meter viewing window
  • 3/8” anchor fasteners

What are Electrical Pedestal Enclosure Applications?

Electrical pedestal enclosure is used in a wide range of applications. It includes:

  • recreational vehicle (RV) parks
  • construction sites
  • underground applications
  • commercial buildings
  • residential buildings

What are the Available Dimensions?

The electrical pedestal enclosure comes in standard dimensions.

  • 20kg weight
  • 750mm overall height
  • 300mm height above floor level
  • 450mm depth below floor level
  • 300 depth
  • 500mm width

Commercial Meter Pedestal | CMP | Overview | B-Line series | Eaton

What are the Benefits of Electrical Pedestal Enclosure?

There are many advantages that an electrical pedestal enclosure offers.

Here are the benefits:

  • Made of reliable material ensures minimal water penetration
  • All materials used are self-extinguishing and halogen-free
  • Can be used in temperatures that vary from -30ºC up to +120ºC
  • Custom paints to fit your preference
  • Easy to clean and low maintenance
  • High UV protection

What are the Steps in Mounting Electrical Pedestal Enclosure?

Wall Mount Event Panel | Eaton

Learn these steps to mount electrical pedestal enclosure:

  1. Unfasten the template from the base of the pedestal enclosure. Do it by taking out 4 bolts, nuts, and washers.
  2. Re-install the 4 bolts, nuts, and washers to the template which they were detached.
  3. Direct the channel for valve and power wiring to the pedestal area. Ensure they elongate at least 5-inches.
  4. Construct a form of cement block using exact dimensions.
  5. And then pour the cement, complete the top with a sink for sewerage.
  6. While you’re waiting for the cement to dry, twirl the template downside so the bolt’s head is on the bottom.
  7. Spot the template in the middle of the cement block. After that, push the bolts into the wet cement. The template must smooth, flat exterior for the enclosure to fasten onto.
  8. Remove the template after the cement dries. Place the nuts and washers apart.
  9. Make sure the cement is flat, even, and clean.
  10. Lastly, connect the irrigation wiring and electrical wiring.

What are the Electrical Pedestal Enclosure Standards and Certification?

Vertiv | Outdoor Enclosures | Vertiv BBE DSX, Compact

Electrical pedestal enclosures meet numerous quality standards.

  • ANSI/ NEMA
  • UL 231
  • UL E163588
  • RoHS
  • ISO
Send Your Inquiry Today
Upload File
Scroll to Top